iStick, 30W with 2200mAh built in battery (Regulated mod)
iStick is a 30W box mod made of aluminum from Eleaf with an integrated battery of 2200mAh. This is an upgrade on Eleafs global success iStick 20W where the huge difference is that iStick 30W is compatible with sub-ohm coils. It can power coils down to 0.4ohm.
On one end is an OLED display that is positioned well, well lit, easy to read and displays volts, watts, battery level, and the evaporator ohms. When the battery is running low and iStick think it's time to recharge it will display "Lock" (for some reason) on the display. On the short side, there are two buttons that regulates the volts or watts (depending on the chosen setting) up or down in increments of .1V or .5W. You'll also find the manual button on the same page. To change between volts and watts, press three times on the manual button, and then three more times to change back.
iStick is a passthrough device, which means you can use it while charging it to load, insert a USB charger (USB charger is supplied in this kit) in iSticks USB input. The USB then indicates with a red glow until it is fully charged and then indicates with a green light. The thread is 510 / eGo and iStick has a built in battery to 2200mAh and can use clearomizers or atomizers with a resistance from 0.4ohm and up.
This iStick comes with US power adapter + European plug adapter.
- Dimensions: 77mm x 35.6mm x 23mm
- Compatible with coil at 0.4ohm+
- Wattage: 5W - 30W
- Voltage: 2V - 8V
- Short circuit protection
- Automatic shut off after ten seconds
- Protection against low voltage
- 2200mAh battery
- 510 threaded
- Adapter for eGo included
- 2,5timmars charging time
- Charging current: 1A
- Charging voltage: 5V
- Weight: 90g
- Loading via Mini USB
- Keys to adjust Watts & Volts
- LED display
- 1 x Eleaf - iStick, 30W (VV/VW-mod)
- 1 x eGo-adapter
- 1 x Micro USB charger
- 1 x AC Adapter
- 1 x Manual